Cam-Centric® Plug Valves

The Cam-Centric® Plug Valve is the solution for systems where slurries, grit or solids are present. The eccentric plug valve is a ¼ turn valve allowing cost effective, low torque actuation for pump control, shut-off and throttling service.

How May We Assist You?

*
*
*
*

  1. PRODUCT OVERVIEW & FEATURES

    Product Overview

    • Available in Sizes 1/2″ – 60″
    • Advanced Technology – Pop™ Shims, Grit Guard™, Eccentric Action
    • Rectangular Port – available in standard or 100% port
    • Available in Threaded, Flanged, Mechanical Joint and 3-Way
    • Horizontal or Vertical Installation
    • Direct Nut, Worm Gear, Cylinder and Electric Actuated
    • Manufactured under a certified ISO 9001 quality system

    Features

    • Plug – heavy-duty fully rubber encapsulated
    • Welded nickel seat – robotically welded 1/8in thick
    • Grit-Guard™ shaft seals – prevents bearing wear and shaft seizing
    • V-type packing – self adjusting and replaceable while under pressure
    • Stainless steel radial upper and lower bearings – permanently lubricated for extended life
    • Upper and lower thrust bearings – to assure plug centering
    • Packing overload protection (Pop™) Shims – ease of adjustment, extends packing life
    • Full access cover – allows inline maintenance

     

  2. CERTIFICATIONS
  3. DOWNLOADS

    Cam-Centric® Plug Valves

    For more information on the Tilted Disc® Check Valve

    Download the Cam-Centric Plug Valves 1/2″ – 2″ Operation Guide.

    Download the Cam-Centric Plug Valve 3″ – 48″ Operation Guide.

    Download the Cam-Centric Plug Valve 4″ – 12″ Operation Guide.